Why do epoxy floors peel in Florida?
Epoxy floors peel in Florida for three main reasons: the slab was acid-etched instead of diamond-ground, moisture vapor was never tested before coating, or a cheap single-coat kit was used instead of a proper multi-layer commercial system. Elite Epoxy solves all three with mechanical grinding, moisture testing, and full flake systems.
How do you prevent moisture issues in South Florida slabs?
Every Elite Epoxy install starts with moisture vapor testing using moisture vapor testing or F2170. Slabs testing above typical thresholds get a Moisture Vapor Barrier (MVB) primer — an epoxy-based barrier that blocks rising vapor pressure from delaminating the coating. It’s the single most important step for longevity in Palm Beach and Broward County.
How long will a properly installed flake floor last?
A correctly installed flake floor with diamond-ground prep and a polyaspartic topcoat typically performs well beyond a decade in Florida conditions. Longevity depends on UV exposure, chemical contact, and maintenance — Elite Epoxy provides a written manufacturer-backed warranty at the time of install.
What can damage my epoxy flake floor?
Even commercial-grade flake floors have limits. Prolonged exposure to battery acid or paint stripper can stain the polyaspartic. Dragging heavy metal objects without a mat can scratch it. Hot tire pickup is prevented by our system but only if the floor has fully cured before parking. Normal use, spills, oil, and pool chemicals are all fine.
Do you offer services besides flake floor installs?
Yes. Elite Epoxy offers concrete grinding and surface prep as a standalone service for homeowners or contractors who need a slab professionally prepared for coating, tile, or self-leveling compound. See our Concrete Grinding Only page for details.
Why choose a flake system over other epoxy types?
Flake floors outperform alternatives in Florida because the multi-color chip layer hides imperfections, adds slip resistance, provides impact protection, and visually masks wear patterns over time. They’re also more forgiving of minor substrate variations than a smooth single-coat epoxy.
Do you offer emergency or same-day service?
Elite Epoxy offers priority scheduling for failed DIY coatings, peeling floors, and moisture-damaged slabs. Most free on-site estimates happen within 1-2 business days across Boca Raton, Delray Beach, Parkland, Deerfield Beach, and Boynton Beach.
Do you serve all of Palm Beach and Broward County?
Elite Epoxy & Coatings is headquartered in Boca Raton and serves Boca Raton, Delray Beach, Parkland, Deerfield Beach, and Boynton Beach as primary service areas — typically within a 30-minute drive of our base. Additional Palm Beach and Broward cities considered on request.